Industrial Plug and Sockets
PCE Industrial Plug & Sockets marketed by CAPE electric are made from Completely Insulated, Shock Proof From IP44 to IP68 versions available 16A to 125A Plug and sockets in 3P, 4P & 5P
International Rating - Series Chart For Industrial Plug & Sockets
Use of the accessories (Terminology)
Industrial Plug & Sockets
​Industrial Plug and Sockets made from PA 6 Material Confirming to IS 60309 1 and 2, Insulated. Outer Plastic material PA 6 is UV resistant with an operating Temperature ranges from -25°C to +85°C (100°C for 1 Hour). Contacts are made from Brass conforming to RoHS-directive 2002/95/EG, Nickel plated contacts also available upon request. Both Screw and Screw-less options available in contact terminals of Plug and Sockets. For higher ampere rating plug and sockets like 63A and 125A we have an laminar Spring inside the sockets for lower insertion and extraction forces, Also Pilot contact / Pilot contact system available in these higher rating plug and sockets for electrical interlocking.
Current Rating: 16A to 125A
Voltage Rating: 100-130V, 200-250V, 380-480V, 500-600V
No of Pins: 2P+E, 3P+E and 3P+E+N
Frequency Ranges: 50Hz, 60Hz, 100-300Hz, 301-500Hz
IP Rating: IP44 and IP67
Switched Interlocked Socket
For application with Portable equipment’s Like Test Laboratory, Kitchen Areas and also for critical applications like Data Centre Sockets with Mechanical Interlocking should be used in order to avoid Plugging and Unplugging in live condition and to avoid loose contact in sockets. For higher ampere rating plug and sockets like 63A and 125A an laminar Spring arrangement inside the socket is available in order] to ensure lower insertion and extraction forces and Ensure Min 10 Point Contact to reduce the contact resistance, Also Pilot contact / Pilot contact system available in these higher rating plug and sockets for electrical interlocking.
Current Rating: 16A to 125A
Voltage Rating: 100-130V, 200-250V, 380-480V, 500-600V
No of Pins: 2P+E, 3P+E and 3P+E+N
Frequency Ranges: 50Hz, 60Hz, 100-300Hz, 301-500Hz
IP Rating: IP44 and IP67
Solid Rubber Distribution Board
​Our solid rubber distributor housings are made from a mixture of natural rubber, styrene and butadiene (NK/SBR). The raw material is processed – in slab form – at pressures of up to 400 t and at a temperature of 180°C. This triggers a vulcanization process which lends the distributor its final form without affecting its consistency.
​FEATURES
-
unbreakable, halogen-free and aging-resistant solid rubber housing
-
resistant to a diversity of oils, greases, gasoline and acids
-
high mechanical strength, aging and corrosion resistant
-
UV Resistant
-
insensitive to fountains of welding sparks and similar
-
temperature resistant -30°C to + 80°C